G3 Double-Head Solar Panel Cleaning Brush

WSE-G03 double-head brush cleaning a solar panel

WSE-G03 double-head brush working on a solar array

G3 Double-Head Solar Panel Cleaning Brush

ModelWSE-G03

Price on request

Highlights

70 cm double-head sweep with balanced, steady handling
Water-curtain cleaning flushes dirt away as you sweep
AC / battery / dual power versions with wireless remote control
Telescopic pole 3.5 / 5.5 / 7.5 m, cleans up to 4 vertical rows
5-6 hour runtime per charge

Request a Quote

Double-head electric rotating brush — 70 cm sweep for 500–6,000 m² sites.

SKU: WSE-G03

Category: Handheld Cleaning Brushes

Overview

Double-head electric rotating brush, water-fed, for faster coverage on larger sites.

Two balanced rotating heads give a 70 cm sweep with steadier handling than a single head — matched to 500–6,000 m² solar farms.

Why this machine

Key Benefits

Dual-head balanced power

the two heads counter-rotate against each other, so the torque that would twist a single-head pole out of line cancels out. The result is a 70 cm sweep the operator can hold steady at full extension — nearly double the width of a single head, at the same walking pace.

70 cm sweepBalanced twin heads368 RPM

Water-curtain quick cleaning

spray above the brushes forms a water curtain that flushes loosened dirt off the glass as you sweep, instead of pushing it into a ridge at the bottom of the module. Flow tops out at 4 L/min, so the rinse is generous without flooding the site.

Water curtainMax 4 L/min

Brushless motor

a new-generation brushless motor with improved speed, torque, waterproofing and life, delivering 85 W per unit and 175 W at peak. No carbon dust and no brush changes, which is the usual reason a water-fed head dies early on a dusty site.

85 W (max 175 W)BrushlessLong service life

Three power versions

mains AC (100–240 V), lithium battery (22.2–24 V) or dual-use, so the same tool suits a plant with sockets and a field site without. A wireless remote switches water and power from the handle, keeping the operator away from making or breaking a water/electrical connection at the panel.

AC 100–240 V24 V batteryDual AC+DC

PV-specific bristles

high-density, wear-resistant bristles at 368 RPM give strong cleaning power with no damage to PV glass or its coating. A charge runs 5–6 hours — shorter than the single-head G2 because there are two motors working, but each pass covers more than twice the width.

Soft PV bristles5–6 h runtimeUp to 4 rows

Why this one

Twice the width, same walk

Telescopic reach

lockable poles in 3.5 / 5.5 / 7.5 m clean up to 4 vertical rows of panels from where the operator stands, and custom lengths are available. The lock is what matters in practice: a pole that creeps shut under load turns a two-row reach into a one-row reach halfway through a shift.

70 cm in one passTwin heads counter-rotate, cancelling the torque a single head fights.
Water-curtain rinseSpray above the brushes flushes dirt off as you sweep, up to 4 L/min.
3.5 / 5.5 / 7.5 mLockable telescopic pole reaches up to 4 vertical rows.
AC, battery or dualA wireless remote switches water and power from the handle.

Technical data

Specifications

Item	Spec
Model	G3 (double head)
Power supply	AC (100–240 V) / DC (22.2–24 V battery) / Dual (AC+DC)
Telescopic rod length	3.5 / 5.5 / 7.5 m
Operating voltage	24 V
Motor power	Single motor 85 W (max 175 W)
Cleaning type	Water
Cleaning width	70 cm
Maximum water flow	4 L/min
Brush head speed	368 RPM (soft bristles)
Runtime	5–6 hours

Right fit?

Best For

500–6,000 m² sites needing higher, steadier throughput. For routine dust over big open rows, compare the G4 roller; for large, high or unreachable arrays, step up to the R1B crawler robot.